/ Модель

Характеристики

Лицензия
MIT
Базовая модель
MiMo-V2.6-Flash-RL-UNCENSORED
Библиотека
gguf
Опубликована
2 окт 2026

MiMo-V2.6-Flash-RL-UNCENSORED-Gorgon-GGUF

Генерация текстаТекст → текст15 профессий

Крупная текстовая MoE-модель Xiaomi MiMo-V2.6-Flash-RL в формате GGUF для локальной диалоговой генерации, программирования и агентных сценариев.

226скачиваний за 30 дней0лайковвеса обновлены2 окт 2026

Бенчмарки

Как модель справилась с задачами пользователей ailist и что о ней публикуют открытые лидерборды

Публичные оценки

Из открытых лидербордов. Сравнивайте результаты одного теста при одинаковых условиях — отсутствие оценки не значит, что модель хуже.

В подключённых источниках результатов для этой модели пока нет.

Что умеет модель

Описание составлено по карточке модели и метаданным Hugging Face

MiMo-V2.6-Flash-RL UNCENSORED GGUF — квантованная сборка модели Xiaomi MiMo-V2.6-Flash-RL, подготовленная cafonez для Framework Desktop с AMD Ryzen AI Max 400 (Gorgon Halo). Это текстовая MoE-модель с 309,8 млрд параметров и 256 экспертами, из которых на токен выбираются 8. Сборка занимает около 154,6 GiB и сочетает исходные веса экспертов MXFP4 с квантованием Q5_K для компонентов внимания и плотных слоёв; заявленный контекст запуска — до 131 072 токенов.

Модель предназначена для диалоговой генерации текста, в том числе для задач программирования и использования агентами с инструментами. Это версия без отказов, созданная на уровне весов dealignai. Вариант GGUF содержит только текстовую часть исходной модели: визуальный и аудиокодеры исключены. Для загрузки требуется специальная сборка ROCmFPX; веса рассчитаны на машину с большим объёмом GPU-доступной памяти, а приведённые в карточке скорости измерены на конкретной конфигурации и не гарантируют такую же производительность на другом оборудовании. В карточке указана лицензия MIT.

Сценарии применения

  • диалоговая генерация текста локально
  • помощь с написанием и разбором кода
  • работа агента с вызовами инструментов
  • ответы на длинные текстовые запросы в расширенном контексте

Ограничения

Требуется сборка ROCmFPX с поддержкой нужного формата тензоров и около 155 GiB GPU-доступной памяти плюс место для KV-кэша; стандартные llama.cpp, LM Studio и Ollama, согласно карточке, эту модель пока не загружают. Версия текстовая, без визуального и аудиокодеров, а удаление отказов повышает риск генерации нежелательного содержания.

Для каких профессий подходит15

Разделы каталога профессий, в задачах которых используется эта модель

Все профессии

Также подходит для

Карточка модели

README от автора на Hugging Face, как он его опубликовал

Открыть на Hugging Face

MiMo-V2.6-Flash-RL UNCENSORED GGUF for the Framework Desktop (Gorgon Halo)

A 4.29 bpw GGUF of dealignai/MiMo-V2.6-Flash-RL-UNCENSORED, the refusal-removed edition of XiaomiMiMo/MiMo-V2.6-Flash-RL (309.8B total parameters, MoE with 256 experts, top-8). It is sized to run fully on the GPU of the 192 GB AMD Ryzen AI Max 400 ("Gorgon Halo") Framework Desktop, and was built and tested on that machine.

  • Requires ROCmFPX main (from PR #33 on). The routed experts are stored as one fused ffn_gate_up_exps tensor per layer, which stock llama.cpp, LM Studio and Ollama do not load for MiMo yet.
  • Size: 154.6 GiB (166.0 GB) in 4 shards. Pass the first shard to -m; the rest are found automatically.
  • Text only: the vision and audio encoders of the original are not included.
  • Uncensored: refusals were removed by dealignai at the weight level (see their card). You are responsible for how you use it.

Files

filesize
MiMo-V2.6-Flash-RL-UNCENSORED-MXFP4-Q5K-00001-of-00004.gguf44.4 GB
MiMo-V2.6-Flash-RL-UNCENSORED-MXFP4-Q5K-00002-of-00004.gguf44.2 GB
MiMo-V2.6-Flash-RL-UNCENSORED-MXFP4-Q5K-00003-of-00004.gguf43.0 GB
MiMo-V2.6-Flash-RL-UNCENSORED-MXFP4-Q5K-00004-of-00004.gguf34.4 GB

Quantization recipe

tensorstypebpwparamssize
routed expert gate+up (fused, 47 MoE layers)MXFP44.25201.9B99.9 GiB
routed expert down (47 MoE layers)MXFP44.25100.9B49.9 GiB
attention (QKV, output), dense FFN (4 layers), MTP projectionsQ5_K5.505.7B3.6 GiB
token embeddingsQ8_08.500.6B0.6 GiB
output headQ6_K6.560.6B0.5 GiB
expert routersF16160.05B0.1 GiB
norms, biasesF32<0.01 GiB
  • The routed experts are the checkpoint's own MXFP4 weights, repacked into GGUF MXFP4 without requantization.
  • Attention and the dense/MTP projections were quantized to Q5_K with an importance matrix computed on a mixed code/prose calibration set. This cut the bytes read per generated token and raised decode speed from about 20 to 23.8 tok/s.
  • Each layer's gate and up experts are stored as one tensor (a byte copy), which lets the GPU run one expert matmul instead of two.
  • The three MTP (next-token prediction) layers are included.

Quality

KL divergence of this file against the same model with attention at Q8_0 (experts identical in both): mean KLD 0.0185, same top-1 token 94.5% (llama-perplexity --kl-divergence, Vulkan). Fusing gate/up and storing the router in F16 left the KLD unchanged.

Speed on the Framework Desktop (Gorgon Halo)

AMD Ryzen AI Max+ PRO 495 / Radeon 8065S, 192 GB LPDDR5X, Ubuntu 26.04, kernel 7.0, Mesa 26.0.8 RADV, Vulkan backend, ROCmFPX main. llama-bench -fa 1 -b 2048 -ub 2048, 3 runs:

testt/s
prefill, 2048 tokens484.9
decode23.6
prefill, 2048 tokens at 32K context258.7
decode at 32K context22.1

These are local measurements on one machine, not leaderboard results.

How to run

1. Let the GPU use the memory

The weights need about 155 GiB of GPU-visible memory plus the KV cache. On a 192 GB machine, raise the GTT limit with kernel parameters (this gives the GPU 176 GiB) and reboot:

ttm.pages_limit=46137344 ttm.page_pool_size=46137344

On Ubuntu, add them to GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub, run sudo update-grub, and reboot. Check with:

cat /sys/class/drm/card*/device/mem_info_gtt_total   # about 189000000000 bytes

Keep the BIOS GPU memory carve-out at its minimum: the GPU uses GTT, and memory carved out as VRAM is no longer available to it as GTT. Only run one model this size at a time; two will not fit in 192 GB.

2. Build ROCmFPX with Vulkan

sudo apt install build-essential cmake libvulkan-dev glslc mesa-vulkan-drivers
git clone https://github.com/ROCmFPX/ROCmFPX && cd ROCmFPX
cmake -B build -DGGML_VULKAN=ON -DCMAKE_BUILD_TYPE=Release
cmake --build build -j --target llama-server llama-cli

3. Download

hf download cafonez/MiMo-V2.6-Flash-RL-UNCENSORED-Gorgon-GGUF --local-dir MiMo-Gorgon-GGUF

4. Serve

./build/bin/llama-server \
  -m MiMo-Gorgon-GGUF/MiMo-V2.6-Flash-RL-UNCENSORED-MXFP4-Q5K-00001-of-00004.gguf \
  -dev Vulkan0 -ngl 999 -fa on \
  -c 131072 -b 2048 -ub 2048 -np 1 \
  --jinja --temp 0.7 --reasoning-budget 4096 \
  --host 127.0.0.1 --port 8080
  • --jinja is required for the chat template (thinking and tool calls). Send "chat_template_kwargs": {"enable_thinking": false} in a request to turn thinking off.
  • --temp 0.7: at the card default of 1.0 the model sometimes emitted hundreds of tool calls in one reply in agent use.
  • --reasoning-budget 4096 caps thinking per turn; without it, agent turns can spend 15K+ characters thinking.
  • For coding agents, also send "parallel_tool_calls": false with each request so the model makes one tool call per reply.
  • -c 131072 fits comfortably with 176 GiB of GTT; -ub 2048 gives the best prefill.

Then use any OpenAI-compatible client against http://127.0.0.1:8080/v1.

Credits

Как запустить

На своей GPU в ailist. Цена — по текущим предложениям провайдеров

GPU в ailist

llama.cpp

Нельзя запустить

Даже самый компактный квант не помещается в 2 × 80 ГБ.

Ревизия весов
998bdd4

0 моделей